Specifications

General Information Guide
- 65 -
Feature Name: Description:
Attendant New Call Tone
Attendant New Call Tone notifies you of new calls to the attendant
console through an audible indication.
Attendant Position Busy-Out See Attendant Busy-Out (Console).
Attendant Recall Attendant Recall automatically alerts the attendant when a trunk
call has been extended to an idle station and not answered within a
specified time-out period or when a call on Hold at the console has
not been answered within a selected time.
Attendant Ringer Control Attendant Ringer Control lets you mute the attendant console
ringer. When the attendant console ringer is muted, incoming calls
continue to be indicated by the Call Waiting prompt at the top of the
display.
Attendant Scratch Pad The Attendant Scratch Pad is your own personal telephone
directory and Speed Dial list. Use it to save telephone numbers for
faster dialing or to store the names and numbers of callers for
future reference.
Attendant Serial Call
Attendant Serial Call automatically returns a call to the attendant
console when the caller finishes with the called party.
Attendant Setup and
Cancellation of Station
Features
The attendant can setup and cancel certain station features such
as Call Forward, Do Not Disturb, Callback, and Reminder.
Attendant System Login The attendant has access to some programming functions from the
attendant console. To access these programming functions, the
attendant must log on.
Attendant Tone Signaling Attendant Tone Signaling lets the attendant send tones over the
circuit once a call has been established.
Attendant Trunk Group Busy
Status
Attendant Trunk Busy Status Display lets you display and/or print
the busy status of the system trunk groups from the attendant
console.
Auto-Answer Auto-Answer lets you automatically answer calls that ring your
Prime line.
Auto-Hold Auto-Hold lets you automatically place an active call on Hold when
you press a line key to originate or receive another call.
Automatic Route Selection
(ARS)
Automatic Route Selection (ARS) simplifies local and long distance
dialing by automatically selecting the most convenient and cost-
effective route and by inserting and/or deleting the proper routing
digits.
Autovon Allows the system to connect to with Autovon networks (defense
switched networks and Canadian switched networks) for incoming
and outgoing calls.
BRI (Basic Rate Interface)
BRI is a basic ISDN service consisting of two 64Kbps channels and
a single 16Kbps channel. This feature is supported on the 3300
ICP with the 3300 BRI Network Services Unit.
Broadcast Groups See Groups - Key System and Multicall.
Broker’s Call
Broker’s Call lets you temporarily suspend a telephone call while
you originate a new call. Once the new call has been established,
you can alternate between the two calls.
Busy Dial Through Busy Dial Through lets you dial a feature access code sequence
when a busy condition is encountered. See Callback and Camp-on.
Busy Override See Override.