User guide

Line Keys and Programmable Keys
90 41-001566-00 REV00 – 10.2014
Intercom Key
By default, the IP phone allows incoming intercom calls to be automatically answered without having to set up an Icom
key on your phone.
Your System Administrator can enable outgoing intercom calls on your phone. If enabled, you must configure an Icom
key on your phone to use for outgoing intercom calls. You must configure a programmable key with the function, Icom.
Configuring an Intercom Key
Note:
For more information about changing the behavior of incoming Intercom calls, see the section “Incoming Intercom Call
Features” on page 153.
Mitel Web UI
1. Click on Operation > Programmable Keys.
or
Click on Operation > Expansion Module <N>.
Programmable Keys
2. Select from Key 1 through Key 8.
3. In the Type field, select Icom.
4. Click Save Settings.
Expansion Module Keys
5. Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
6. In the Type field, select Icom.
7. Click Save Settings.