Mitel M685i Expansion Module 41-001525-00 REV01 INSTALLATION GUIDE
NOTICE The information contained in this document is believed to be accurate in all respects but is not warranted by Mitel Networks™ Corporation (MITEL®). The information is subject to change without notice and should not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this document.
Software License Agreement SOFTWARE LICENSE AGREEMENT Mitel, hereinafter known as "Seller", grants to Customer a personal, worldwide, non-transferable, non-sublicenseable and non-exclusive, restricted use license to use Software in object form solely with the Equipment for which the Software was intended. This Product may integrate programs, licensed to Mitel by third party Suppliers, for distribution under the terms of this agreement.
Mitel M685i Expansion Module Installation Guide Software License Agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Expansion Module Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 About This Guide . . . . . . . . . . . . . . .
Welcome WELCOME Congratulations on your purchase of the Mitel M685i Expansion Module! The M685i Expansion Module is designed to increase the power and flexibility of the 6800i Series IP telephones. Up to three modules can be used with the 6865i, 6867i, and 6869i IP phones to create a powerful, feature rich console option. 6865i 6867i 6869i Modules share power and signaling with the phone, eliminating the need for additional wiring.
Mitel M685i Expansion Module Installation Guide EXPANSION MODULE PARTS When you unpack the M685i Expansion Module package, you should ensure that you have all of the following items. If any part is missing, contact the supplier of your phone.
Installation INSTALLATION The M685i Expansion Module connects to the right side of the 6865i, 6867i, and 6869i IP phone via the connector plate. CONNECTING THE M685I EXPANSION MODULE TO YOUR PHONE Use the following procedure to connect the M685i Expansion Module to your IP phone: 1. Locate and remove the two connector plate insertion area rubber caps on the right side of the phone. Rubber Caps 2. Turn your phone over so that the back of the phone is facing you. 3.
Mitel M685i Expansion Module Installation Guide 5. Connect the M685i Expansion Module to your phone using the connector plate as indicated in the illustration below. 6865i Connection A B D C D A B D 6867i/6869i Connection A B D D A B D 6. 4 Using a #2 Philips head screwdriver, screw in the 6mm screw into the hole labelled D.
Installation ATTACHING THE STAND 1. Locate the stand insertion area on the back of the M685i Expansion Module. 2. Carefully insert the stand into the insertion area and slide the stand towards the right until it snaps in place. Note: The orientation of the stand determines the viewing angle. If the bottom of the stand is installed facing the top of the module the viewing angle will be 35°. If the bottom of the stand is installed facing the bottom of the module the viewing angle will be 55°.
Mitel M685i Expansion Module Installation Guide ATTACHING MULTIPLE M685I EXPANSION MODULES Multiple M685i Expansion Modules (up to a total of three) can be daisy-chained to a phone providing a total of 252 softkeys (three modules with three pages of 28 softkeys each). Use the following procedure to connect additional M685i Expansion Modules to your IP phone: 1. Turn your phone and connected M685i Expansion Module over so that the back is facing you. 2.
Configuration and Usage CONFIGURATION AND USAGE UPGRADING THE M685I EXPANSION MODULE The M685i does not require a separate firmware package. M685i software is embedded within the respective phone’s firmware package. When the M685i is connected and is powered up, the LED corresponding to the second button on the module will turn solid red and the module will check to see if an upgrade is required. If it does not have the latest software, the module will upgrade itself using the phone’s embedded firmware.
Mitel M685i Expansion Module Installation Guide CONFIGURING THE M685I EXPANSION MODULE The M685i Expansion Module programmable softkeys support a multitude of different functions. You can configure the keys using the Mitel Web UI at the path, Operation->Expansion Module (where N is the module number) when modules are attached to the 6865i, 6867i, or 6869I IP phone. Notes: 1. On each of the respective Expansion Module pages, the M685i Bootloader version and App version is displayed.
Limited Warranty LIMITED WARRANTY (Not applicable in Australia – see below for Limited Warranty in Australia) Mitel warrants this product against defects and malfunctions in accordance with Mitel's authorized, written functional specification relating to such products during a one (1) year period from the date of original purchase (“Warranty Period”).
Mitel M685i Expansion Module Installation Guide LIMITED WARRANTY (AUSTRALIA ONLY) The benefits under the Mitel Limited Warranty below are in addition to other rights and remedies to which you may be entitled under a law in relation to the products.
Limited Warranty (Australia Only) WARRANTY REPAIR SERVICES Procedure: Should the product fail during the Warranty Period and you wish to make a claim under this express warranty, please contact the Mitel authorized reseller who sold you this product (details as per the invoice) and present proof of purchase. You will be responsible for shipping charges, if any.
