Specifications

System Hardware
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005
Hard IP Endpoints
Page 65
Hard IP Endpoints
Models 8664 and 8665
The Model 8664 and 8665 endpoints are wireless, handheld portable endpoints. These end-
points operate like a Model 8660 IP endpoint and support Inter-Tel Protocol (IPT) mode. For
details about these endpoints, refer to the NetLink SVP Server and Model 8664/8665 Installa-
tion Manual (part no. 935.4521).
Model 8660
The Model 8660 IP endpoint operates in ITP mode and supports both 10Base-T and 100Base-
TX interfaces. The endpoint has a six-line display with menu buttons, speaker and microphone,
programmable and fixed buttons, and dedicated headset and handset jacks. This endpoint oper-
ates in ITP mode.
IP PhonePlus
The IP PhonePlus operates in ITP mode. This endpoint has a six-line display with menu but-
tons, speaker and microphone, and programmable and fixed buttons. It has one jack that is
shared by the headset and handset.
IP Single-Line Adapter (SLA)
The IP SLA provides an interface between the standard single line endpoint and a 10Base-T
network. It allows you to make phone calls through the IP network. The IP SLA has an Ether-
net IEEE 802.3 10Mbps UTP interface. The IP SLA uses flash memory and its software can be
updated over the LAN.
Model 8601 SoftPhone for Pocket PC
The Model 8601 is a software-based SIP softphone that runs on selected Pocket PC 2002 (or
later) Personal Digital Assistant (PDA) platforms. This endpoint operates in SIP mode only.
For a list of supported PDAs and information about installation and programming the Model
8601, refer to the Model 8601 SoftPhone for Pocket PC Installation Manual (part no
835.2736).
Model 8614 Mini-Direct Station Select Unit
The Mini-DSS Unit provides one-button access to 16 extension numbers and/or feature buttons
or resources. The Mini-DSS attaches to a Model 8660 endpoint, but to no other IP endpoints.
Single Line Endpoints
Industry-standard, single line endpoints can be installed on the system and/or used as an off-
premises extension (OPX). An on-premises single line endpoint can be an AC-ringing single
line endpoint, a playback device, and other single line device.
Single line DTMF endpoint users gain access to the features by hookflashing (pressing and
releasing the hookswitch quickly) and entering feature codes.
Off Premises Extensions (OPX)
Off premises extensions are remote single line DTMF endpoints connected to the Inter-Tel sys-
tem through telephone company OPX circuits (or customer-provided circuits).