Specifications

System Hardware
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005
Introduction
Page 63
Introduction
The Inter-Tel CS-5200/5400 platform can be licensed and programmed to support a variety of
multi-protocol, IP, and SIP endpoints and other system-enhancing hardware. The platform sup-
ports communication needs from individual workstations to single-site or network-wide Hunt
Group arrangements.
Types of hardware available include basic “hard” IP endpoints that typically support workers
in an office environment. Some endpoints are multi-protocol—that is, they operate in either IP
or SIP mode. Some operate in IP mode only and others operate in SIP mode only. Other
options include wireless IP endpoints, a “soft” phone that operates on a Personal Digital Assis-
tant (PDA), and Single-Line Adapters that support standard single line endpoints.
For Attendant-like capability, the system supports a 16-extension direct station select (DSS)
unit that attaches to one of Inter-Tel’s Six-Line Display IP endpoints. To enable IP communica-
tion through the public telephone network, the Inter-Tel CS-5200/5400 also supports gateway
hardware.
Supported Endpoints
To allow system flexibility and cost efficiency, a variety of Inter-Tel and industry-standard end-
points can be used on the Inter-Tel CS-5200/5400, including the following devices:
• Hard Multi-Protocol Endpoints (Operate in ITP or SIP mode)
— Model 8600
— Model 8620
— Model 8622
— Model 8662
— Model 8690
• Hard IP Endpoints
— Model 8664 (wireless)
— Model 8665 (wireless)
— Model 8660
—IP PhonePlus
— IP Single-Line Adapter (IP SLA)
• Model 8601 SoftPhone for Pocket PC (operates in SIP mode only)
• Model 8416 Mini-Direct Station Select (DSS) Unit
• Single Line Endpoints
• Gateways
— Media Gateway Control Protocol (MGCP) Gateways
— SIP Gateways