Specifications

Administrator Procedures

INTER-TEL

CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005

Page 30 Trunk Programming

ARS, press or the YES menu button to enable the option. Or, press or

the NO menu button to disable it. Then press or

ACCEPT to continue.

3.) Subject to toll restriction: To program the trunk group Subject to Toll Restric-

tion option, press or the

SUBJECT TO TOLL menu button. When the dis-

play shows SUBJECT TO TOLL, press or the YES menu button to enable

the option. Or, press or the NO menu button to disable it. Then press

or ACCEPT to continue.

Trunk List: To program the list of trunks for the trunk group, press or the

TRUNK LIST menu button. When the display shows ENTER TRUNK EXTEN-

SION, enter trunks into the list as follows:

1.) Enter a trunk extension using one of the methods described on page 27.

2.) The display shows the extension number and a Yes/No prompt. Press or

the

YES menu button, followed by , to include the trunk in the list. Or,

press or the

NO menu button, followed by , to exclude the trunk from

the list.

3.) When the display returns to ENTER TRUNK EXTENSION, select another

extension number. Or, if finished programming the trunk list, press or

ACCEPT to continue.

c. To exit, press or

ACCEPT to move backward through the prompts until you

reach the ENTER DATABASE OPTION prompt.

6. When finished with all programming, press while the ENTER DATABASE

OPTION prompt is displayed. This ends the programming session.

7. If a system reset is required, the display shows ENTER SYS RESET OPTION. Do one

of the following:

• Delayed Reset: Press or the DELAYED menu button to delay the reset. The dis-

play shows DELAYED RESET SCHEDULED. The system will be reset at the pre-

programmed time.

• Immediate Reset: Press or the IMMEDIATE menu button to reset the system

now.

CAUTION

Possible interruption of calls in progress. When the system is Reset, all calls in

progress are dropped immediately.

1 2