Specifications

Administrator Procedures

INTER-TEL

CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005

Page 24 System Programming

Scroll through the numbers: To scroll through the extension number list, press the

high end of the Volume button or the

NEXT menu button to scroll forward, or press the

low end of the Volume button or the

PREVIOUS menu button to scroll backward.

When the desired extension number is displayed, press or

ACCEPT to continue.

2. The display shows SWAP (extension) WITH EXTENSION. Enter the second extension

number to be swapped using the same methods previously described. The display

shows DATABASE UPDATED.

3. When the display shows ENTER SYSTEM OPTION, press again to exit to the

ENTER DATABASE OPTION prompt.

4. When finished with all programming, press while the ENTER DATABASE

OPTION prompt is displayed. This ends the programming session.

5. If a system reset is required, the display shows ENTER SYS RESET OPTION. Do one

of the following:

— Delayed Reset: Press or the

DELAYED menu button to delay the reset. The dis-

play shows DELAYED RESET SCHEDULED. The system will be reset at the

pre-programmed time.

— Immediate Reset: Press or the

IMMEDIATE menu button to reset the system

now.

NOTE

If the feature times out while entering an extension number, the displays

shows INCOMPLETE EXTENSION.

NOTE

If you cancel or terminate the feature without entering the second extension

number, the system discards any changes that have not yet been saved,

and the display shows NO UPDATE PERFORMED. If the entered extension

is the Administrator endpoint performing the swap, the same extension

number as the target endpoint, or the wrong device type, the display shows

CONFLICTING EXTENSION.

NOTE A system reset will drop all calls in progress.