Specifications

System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005
Using the Last Number Dialed Feature
Page 203
4. If desired, customize the second line of the message: Use any combination of the fol-
lowing methods.
a. Remain in numeric mode: Press the dialpad buttons to enter the desired number.
Use the pound button ( ) for a hyphen (-) and the asterisk button ( ) for a
colon (:). Inter-Tel endpoint users can press the button once to leave a
space, or press the button to backspace.
b. Change to alphanumeric mode (Inter-Tel endpoints only): Press the but-
ton (the button lights) or the
USE ALPHA MODE menu button, then enter the
desired characters. Refer to the chart above. Inter-Tel endpoint users can press the
button once to advance or twice to leave a space, or press the but-
ton to backspace.
c. Use Speed Dial and/or redial numbers (Inter-Tel endpoints only): In either
numeric or alphanumeric mode, you can speed dial a number (using the Speed
Dial button or feature code). In numeric mode you can press the button to
enter the stored characters. You may chain Speed Dial and/or redial numbers
together.
5. Terminate programming:
Inter-Tel endpoints—Press the Speaker or the
ACCEPT button, or lift and replace the
handset. The button lights. (Display endpoints show selected message. Date
and time appear on the second line if there is no customized message.)
Single line endpoints—Hang up.
To cancel Do-Not-Disturb:
Model 8660 or 8662: While on-hook, press the lit button. The button goes off,
and the display shows DO NOT DISTURB OFF.
Other Inter-Tel endpoints: While on-hook, press the lit button, or enter the
Cancel Do-Not-Disturb feature code (371) or Do-Not-Disturb On/Off feature code
(372). The button goes off, and the display shows DO NOT DISTURB OFF.
Single line endpoint: Lift the handset, enter the Cancel Do-Not-Disturb feature code
(371) or Do-Not-Disturb On/Off feature code (372), and hang up.
To place your busy station in Do-Not-Disturb while a call is camped on:
If, while on a call, you hear call waiting signals and you want to let the caller know you do not
want to be disturbed:
Inter-Tel endpoints—Press the button or press the Special button and then
enter a Do-Not-Disturb feature code (370 or 372). The button lights. The display
shows DO-NOT-DISTURB ON. The intercom caller is no longer camped on and
receives Do-Not-Disturb indications.
Single line endpoints—(This procedure will interrupt your call in progress!) Hook-
flash and enter the a Do-Not-Disturb feature code (370 or 372). The intercom caller is
no longer camped on and receives Do-Not-Disturb indications. Hookflash twice to
return to the current call.
#
FWD
MUTE
MSG
FWD MUTE
REDIAL
DND
DND
DND
DND