Specifications

System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005
Page 192 Dialing Station Speed Dial Numbers
To view the stored numbers and names (on a display endpoint):
1. While on-hook, enter the Program Station Speed Dial feature code (383). The display
shows PROGRAM STN SPD # (0-9) OR SCROLL. Do one of the following:
• Use a location code: Dial the desired Speed Dial location code (0-9). When the
name is displayed, press or
ACCEPT to view the number.
• Scroll through the displayed numbers: Scroll to the desired number by pressing
the Volume,
NEXT, or PREVIOUS button. The name and number are displayed for
each location.
2. After viewing the number, press the Speaker button, , or to exit, or wait for the
display to return to date and time.
Dialing Station Speed Dial Numbers
To dial a Station Speed Dial number at a single line endpoint:
1. Lift the handset. (Inter-Tel endpoints can remain on-hook.)
2. If placing an outside call, select an outgoing trunk or use ARS. If placing an intercom
call or if the outside number contains a trunk access code, skip this step.
3. Hookflash and enter the Station Speed Dial feature code (382). You hear a confirmation
tone. Then dial the location code (0-9). The number is dialed.
To dial a Station Speed Dial number at a non-display endpoint:
1. Lift the handset or remain on-hook.
2. If placing an outside call, select an outgoing trunk or use ARS. If placing an intercom
call or if the outside number contains a trunk access code, skip this step.
3. Inter-Tel endpoint with a Speed Dial button: Press the Speed Dial button of the
desired number. The number is dialed.
Inter-Tel endpoint without a Speed Dial button: Enter the Station Speed Dial feature
code (382). You hear a confirmation tone. Then enter the location code (0-9). The
number is dialed.
To dial a Station Speed Dial number at a display endpoint:
1. Lift the handset or remain on-hook.
2. If placing an outside call, select an outgoing trunk or use ARS. If placing an intercom
call or if the outside number contains a trunk access code, skip this step.
3. Inter-Tel endpoint with a Speed Dial button: Press the Speed Dial button of the
desired number. The number is dialed. Display endpoints show the number.
Inter-Tel endpoint without a Speed Dial button: Enter the Station Speed Dial feature
code (382). Then do one of the following to dial the number:
• Use a location code: Dial the desired Speed Dial location code (0-9).
• Scroll through the displayed numbers: Scroll to the desired number by pressing
the Volume,
NEXT, or PREVIOUS button.
#
#