Specifications

System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005
Page 172 Ending the Conference and Placing All Parties on Hold
To return to the conference:
Lift the handset and/or press the button again.
To exit the conference and leave the other parties connected (any inside party) with a sin-
gle line endpoint:
During the conference, hookflash and hang up.
To return to the conference: Lift the handset and/or enter the Conference feature
code (5).
Ending the Conference and Placing All Parties on Hold
To end the conference and put all parties on hold (any inside party) with an Inter-Tel
endpoint:
During the conference, press the button and hang up. The button and a
Call button flutters. The parties are still connected in a conference.
To place the parties on individual hold: Press the Hold button or enter the Individual
Hold feature code (336). You can then return to each party individually by pressing the
associated Call or button.
To end the conference and put all parties on hold (any inside party) with a single line end-
point:
During the conference, hookflash and hang up. The parties are still connected in a con-
ference.
To place the parties on individual hold: Lift the handset and enter the Individual
Hold feature code (336). You can then return to each party individually by entering the
Individual Hold feature code again.
Placing the Entire Conference on Hold
Any inside party involved in a conference can place the conference on hold at his or her end-
point. The other conference parties remain connected and can converse. The user that placed
the conference on hold can then place calls or use system features while the conference is on
hold. Then the user can return to the conference on hold. Note, however, that a conference may
not be terminated while it is on hold.
Once a user has moved a conference to hold, the user may, if desired, establish another confer-
ence. Because each conference is established under a separate Call button, it is possible for the
user to have access to any individual conference for further call processing. If the user elects to
use the button for conference access, the button will rotate through the confer-
ences in priority order. The button will always reflect the status of the top-priority con-
ference. The priority order for the button when multiple conferences are in effect is:
• Conference or call on transfer hold
• Ringing (ring in, recall, or camp on) conference
• Conference on hold
• Active conference
NOTE
If the Hold timer expires while you are out of the conference, the parties
recall your endpoint. When the recall rings at your endpoint, lift the handset
to answer the recall. If the recall is not answered before the Recall timer
expires, it will recall the Attendant.
CNF
CNF CNF
IC
CNF CNF
CNF
CNF