Specifications
System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005
Page 102 Extension Numbers
Extension Numbers
Extension numbers are recognized as feature codes by the system. When the system is in the
default state, the extension numbers are assigned as follows:
Attendant Endpoints
Attendant endpoints can be called by dialing 0 at the endpoints they serve. Usually, they are
also programmed to provide these services:
• Central operators for incoming calls
• Message centers
• Recall endpoints for unanswered calls
Any endpoint can be designated as an Attendant endpoint during database programming.
Attendant endpoints should be equipped with display endpoints to show recall sources.
A hunt group can be assigned to serve as an Attendant. However, the individual endpoints in
the hunt group are not required to be programmed as Attendant endpoints, and the database
will not reflect that the individual endpoints serve as an Attendant for any other endpoints.
(This feature is especially useful when a Voice Mail hunt group is assigned as an Attendant.)
Seize Device 9973/9173 Used during troubleshooting to seize a specific trunk or endpoint by
indicating the board number, port number, and device number.
System History — Freeze
System History —
Unfreeze
9993/9193
9998/9198
The system fault history can be halted (frozen) or re-enabled using
these feature codes when diagnostics mode is enabled. Fault his-
tory is used by service personnel when troubleshooting the system
Table 20. Diagnostics Feature Code Definitions(Continued)
FEATURE NAME
CODE (US/
EUROPE)
DEFINITION
Table 21. Default Extension Numbers
FUNCTION NUMBER
Attendant 0
Endpoints 1000–1999
Hunt groups 1-75 2000–2074 or 2000–2299
Voice Processing System Applications 2500–2999
Page Zones 9600–9609 or 9600–9649 (Used only for program-
ming a feature button to select a page zone.)
External Page Ports 91000–91003
Individual Trunks 94000–95999 (Determined by the bay and device
number. Used for programming and troubleshoot-
ing.)
NOTE
For information on Automated Attendants, see page 221 in the “Voice Processing
Features” section of this guide.