Specifications

System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005
Diagnostics Feature Codes
Page 101
Diagnostic - Mark As
Leaks
9945/9145 This is used by Inter-Tel software developers and cannot be used
in Beta or Production software.
Diagnostic - Mark As
Quiescent
9946/9146 This is used by Inter-Tel software developers and cannot be used
in Beta or Production software.
Diagnostic - Minor Reset 9964/9164 This is used by Inter-Tel software developers and cannot be used
in Beta or Production software.
Diagnostic - Network
Freeze Zone
System Histories
Diagnostic - Network
Unfreeze Zone
System Histories
9939/9139
9989/9189
The system fault history for any freeze zone in the network can be
halted (frozen) or re-enabled using these feature codes when diag-
nostics mode is enabled. The fault history can then be extracted
from each zone and used by service personnel when troubleshoot-
ing the system.
Diagnostic - Network
Groups
9963/9163) Allows an administrator to verify that the Network Groups on the
local node are programmed properly. When 9963 is entered at an
administrator’s endpoint, the telephone system initiates pings from
each Inter-Tel IP device on the local node and determines if the
other devices respond to the ping. If a device does not respond to
the ping or if a firewall is detected, the system issues a Message
Print message.
Diagnostic - Print
Auxdata
9972/9172 (Not Programmable) Sends a report to a designated printer or file
that shows system reset history information to be used for trouble-
shooting purposes.
Diagnostic - Print
Message Log
9975/9175 (Not Programmable) Sends a report to a designated printer or file
that lists system error messages to be used for troubleshooting pur-
poses.
Diagnostic - Print
Network Log
9976/9176 This feature code prints the network log to message print. This fea-
ture is useful in determining the system of a networked system.
Diagnostic - Query Node
Traffic
9978/9178 Using this feature code you can query the status of various devices
on the system based on the status of the traffic flags in Database
Programming. The output is sent to Message Print.
Diagnostic - Show
Version
9928/9128 To check the call processing software version at an administrator's
endpoint, you can enable diagnostics mode, then enter this feature
code to view the version and date of the call processing software.
However, feature code 9928 displays the firmware version of the
endpoint if it is in SIP mode (see page 84).
Diagnostic - SIP View 9987/9187 Allows the user to change the system wide SIP output value.
Options include No Output, Headers and Full Output.
Diagnostic - Spare 1-3 9910-9912/
9110-9112
This is used by Inter-Tel software developers and cannot be used
in Beta or Production software.
Diagnostic - System
History
9974/9174 This is used by Inter-Tel software developers and cannot be used
in Beta or Production software.
Diagnostic - View
Displays
9983/9183 This is used by Inter-Tel software developers and cannot be used
in Beta or Production software.
Program Database 9932/9132 Can be used for programming endpoint, system, and trunk parame-
ters.
Table 20. Diagnostics Feature Code Definitions(Continued)
FEATURE NAME
CODE (US/
EUROPE)
DEFINITION