Specifications
System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005
Page 100 Diagnostics Feature Codes
Diagnostic - Dump Exten-
sion
9922/9122 Allows an Inter-Tel field technician to dump a device or structure
when debugging a problem. The system dumps the internal data
structures for that extension to message print. If you press the
pound button (#) you are prompted for a command. The command
allows you to enter an alphanumeric string of the structure to dump.
Diagnostic - Dump Node
Information
9936/9136 The user can easily dump node information to Message Print using
a single feature code. Pressing the Dump Node Information feature
code dumps specified node information to Message Print for diag-
nostic purpose. When the system prompts for a node number, enter
the desired node number or zero (0) for all nodes within a network.
If the node does not exist, an error message saying INVALID
NODE NUMBER appears and prompt the user for a node number
again.
After entering a node number, the system displays a confirmation
message on the endpoint display. This helps for the user to analyze
which nodes are up and which nodes are down (the word ‘down’
does not mean that the node is completely down, it simply means
the node is unreachable). For Example:
If all nodes are up, the display shows ALL NODES ARE UP X. The
‘X’ represents the total number of the nodes.
If node 3 and 5 of a 5-node network are down, the display shows #
NODES DOWN 2 3 5.
Diagnostic - Dump
System Diagnostics
9933/9133 Allow a System Administrator to dump system diagnostic informa-
tion to Message Print.
Diagnostic - Heap Dump 9943/9143 This is used by Inter-Tel software developers and cannot be used
in Beta or Production software.
Diagnostic - Heap
Statistics
9947/9147 This feature code outputs miscellaneous heap information to Mes-
sage Print as well as putting up a message on the endpoint that
indicates the percentage of available dynamic heap memory. This
feature code is useful in determining if the system is losing heap
memory and how quickly the system may be losing it.
Diagnostic - ISDN View 9948/9148 This feature code is toggles through the three different ISDN view
output modes.
Entering the feature code the first time puts the ISDN view feature
into headers only mode. In this mode the system outputs all ISDN
messages to message print in header format (i.e., it does not con-
tain any ISDN information elements).
Entering the feature code the second time puts the ISDN view fea-
ture into full mode. In this mode the system outputs all ISDN mes-
sage to message print in full format (i.e., each ISDN information
element).
Entering the feature code one more time turns this feature off.
Diagnostic - Major Reset 9962/9162 This is used by Inter-Tel software developers and cannot be used
in Beta or Production software.
Table 20. Diagnostics Feature Code Definitions(Continued)
FEATURE NAME
CODE (US/
EUROPE)
DEFINITION