Specifications

System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005
Diagnostics Feature Codes
Page 99
Diagnostics Feature Codes
The Diagnostics Mode feature code (9900) must be entered at the Administrator’s endpoint to
enable system diagnostic mode before the following feature codes can be used.
Modem Disable 9867 Disables the internal modem; used in conjunction with the assigned
extension number of the modem.
Modem Enable 9866 Enables the internal modem; used in conjunction with the assigned
extension number of the modem.
Modem Reset 9869 Resets the internal modem; used when the modem fails to answer
an incoming call or to synchronize with an external modem.
CAUTION: database corruption could occur if the modem is reset
during a database programming session. Inter-Tel recommends
that you assign the modem extension to a Speed Dial button.
Night Ring On/Off 9860 Places system in night mode or cancels night mode.
Periodic Diagnostics
On/Off
9825 Periodic diagnostics extends and improves the functionality and
checks and reconciliations performed on various resources in the
system.
Program System Speed
Dial
9801 Programs system-wide Speed Dial numbers when followed by loca-
tion codes (000-999).
Set Network Date/Time 9810 Programs the time and date for all nodes in the system. (Local time
and date can also be reset by individual nodes.)
Set Time/Date 9800 Programs system time and date
Synchronize Network Time 9811 Synchronizes the minutes past the hour across the network.
NOTE: If a node's time is off by more than 30 minutes, synchroniz-
ing the minutes may cause the hour to change. Also, network time
is automatically synchronized every day at 12:30 AM (00:30), using
the time setting on the node with the lowest number.
Table 19. Administrator Feature Code Definitions(Continued)
FEATURE NAME
CODE (US/
EUROPE)
DEFINITION
Table 20. Diagnostics Feature Code Definitions
FEATURE NAME
CODE (US/
EUROPE)
DEFINITION
Compression On/Off 9982/9182 Compresses call processing messages sent to Database Program-
ming, speeding up transfers. You should not disable this feature
unless instructed to do so by Inter-Tel personnel.
Compression Statistics 9981/9181 Dumps various statistics related to the Database Programming
compression algorithm. This feature should be used only when
directed to do so by Inter-Tel personnel.
Diagnostic - ASAI Snoop
Off
9926/9126 This feature code turns off the ASAI output to Message Print. ASAI
is the protocol the system uses to talk to Database Programming
and the AVDAP. Turning this feature on helps the Inter-Tel Engi-
neers debug the messaging between Call Processing and Data-
base Programming or Call Processing and the AVDAP.
Diagnostic - ASAI Snoop
On
9927/9127 This feature code turns on the ASAI output to Message Print. ASAI
is the protocol the system uses to talk to Database Programming
and the voice processing system. Turning this feature on helps the
Inter-Tel Engineers debug the messaging between Call Processing
and Database Programming or Call Processing and the AVDAP.