Specifications

System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005
Page 98 Administrator Feature Codes
Administrator Feature Codes
The following feature codes may be used only at designated Administrator endpoints. Non-
Administrator endpoint users hear reorder tones if they attempt to use these feature codes.
Station Monitor 321 (Hunt Group Supervisors Only) Allows a designated hunt group
supervisor to monitor a call of anyone in the associated hunt group.
Station Speed Dial
Station Speed Dial Programming
382
383
Dials/programs one of the 10 Station Speed Dial numbers when fol-
lowed by a location code (0–9). (Inter-Tel endpoints use the Station
Speed Dial button plus a location code for programming and dial-
ing, or they can program Speed Dial buttons for one-button dialing.)
Steal 387 Allows the supervisor to take away a call from the hunt group mem-
ber/agent.
Switch Keymap 399 (Inter-Tel endpoints Only) This allows an endpoint user to switch
between standard and alternate keymaps.
System Forward Enable
System Forward Disable
System Forward On/Off
352
353
354
Enables or disables the database-programmed System Forwarding
feature for this endpoint. The on/off feature code can be used to
toggle the feature on or off.
System Speed Dial 381 Dials one of the 1000 System Speed Dial phone numbers when fol-
lowed by a location code (000-999). Also used for reviewing Sys-
tem Speed Dial numbers. (Inter-Tel endpoints use the SYS SPD
button.)
Transfer to Hold 346 Transfers a call to another endpoint and places it on individual hold
so that it does not ring or send call waiting signals until it recalls.
Transfer to Ring 345 Transfers a call to another endpoint or to an outside phone number.
(Inter-Tel endpoints use the TRANSFER button.)
Table 18. Endpoint Feature Code Definitions(Continued)
FEATURE NAME CODE DEFINITION
Table 19. Administrator Feature Code Definitions
FEATURE NAME
CODE (US/
EUROPE)
DEFINITION
Clear Network Alarm 9851 Clears network-wide alarms on every node in the network, but will
not affect system alarms. The Clear Network Alarm feature code
may be entered on any node in the network, but the Send Network
Alarms flag must be set for the administrator to clear alarms on
other nodes in the network.
Clear System Alarm 9850 Clears all local and network-wide system alarm displays on your
node.
Diagnostics On/Off 9900/9100 Enables or disables system diagnostics mode to perform diagnos-
tics functions such as freezing/unfreezing the database, printing
message logs, and seizing a device for troubleshooting purposes.
NOTE: Because diagnostics mode affects system performance, it
is recommended that you run the diagnostics program when the
system is idle.
Enable Network Day 9862 Places any or all remote nodes into day mode (you are prompted
for the node number).
Enable Network Night 9861 Places any or all remote nodes into night mode (you are prompted
for the node number).