Specifications

System Hardware
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.0 – April 2005
Additional Information and Troubleshooting
Page 85
Off-premises endpoints: Single line DTMF endpoints can be connected to the system at a
remote location. The connection is made through a telephone company OPX circuit or a cus-
tomer-provided trunk.
Playback devices: A playback device (answering machine) can be used in place of the voice
processing system interface to help process calls. The device answers a call, plays a message,
then disconnects from the call (or transfers it to a hunt group) to allow the caller access to other
system resources.
Power failure transfer equipment: Power failure transfer equipment can be installed to con-
nect one or more single line endpoints to predetermined trunks during a power or system fail-
ure.
Night transfer equipment: Night transfer equipment can be installed to turn on or off lights,
an alarm system, or other devices.
Additional Information and Troubleshooting
For additional information about multi-protocol endpoints not covered in this administrator
guide, see the Multi-Protocol Endpoints: Supported Features, Buttons, and LED Indications
document (part number 835.2840). For detailed troubleshooting information, including trou-
bleshooting tables for SIP and IP devices, see the latest version of the Inter-Tel CS-5200/5400
Communication Servers Installation and Maintenance Manual (part no. 580.8001).