User guide
Call Features
Page 34 Mitel
®
Model 8520 User Guide – Issue 12, October 2008
Remote Programming
You can use Remote Programming to access the Do-Not-Disturb (DND) and Call Forwarding
features from another system endpoint or an external phone.
Entering a Remote Programming Password
Before using Remote Programming, you should enter a new password.
To enter a Remote Programming password:
1. Dial 392. ENTER PASSWORD appears.
2. Enter your current password (the default password is your extension number), followed
by #. CHANGE PASSWORD TO appears.
3. Enter the new password followed by
#. VERIFY PASSWORD appears.
4. Enter the new password again followed by #. DATABASE UPDATED appears.
To change the station password from another phone, see “Using Remote Programming to
Change the Password” on page 34.
Using Remote Programming to Change the Password
You can use Remote Programming to change the station (endpoint) password.
To use Remote Programming to change the station password:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
• Use any endpoint on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 392.
6. Enter the new password followed by
#.
7. Enter the new password again followed by #.
NOTE
A Direct Inward System Access (DISA) number is required to use Remote
Programming from an external phone. Contact your system administrator for more
information.