User guide

20
Inter-Tel
®
Attendant Console User Guide
To select the desired nodes:
— Check Put selected nodes in night mode, the Node list becomes
editable, as shown below. Check the desired nodes and click OK.
Connection Tab
The Connection tab is used to set up communication with the telephone system. This
information must be entered correctly for the Attendant Console to work. If you do
not know the information, contact your Telephone Administrator.
• Your St a t ion :
— Extension: Enter your extension number.
— Node: Enter the node to which your endpoint is connected.
NOTE: If you do not know which node your endpoint is connected, unplug
and replace your endpoint’s line cord. The endpoint shows "CKT
WW:XX.YY.ZZ" on the second line of the LCD display. The number to the left
of the colon (WW) is the node number of your endpoint.