User guide

9
Inter-Tel
®
Attendant Console User Guide
GETTING STARTED
IF YOU ARE A NEW USER:
—Click Add User. This allows you to set and save your own custom features and
settings for use during another session. The following dialog appears.
Type your name in the Enter username field and select a username that you
would like to inherit the user settings from, then click OK. For information on
setting the Attendant Console properties, see “Setting Attendant Console Proper-
ties” on page 11.
T
O USE PREVIOUSLY SET FEATURES:
— Select the desired name from the drop-down list of previously entered names,
then click Log On. The system displays the message, “Retrieving System Infor-
mation.”
If this is the first time you have used the Attendant Console, the system will perform a
refresh.
NOTE: If a second user logs on, the program automatically logs off the previous user.
TO LOG ON AS A DIFFERENT USER:
1. Select a different user from the list.
2. Click Log On or Add User from the Attendant Console dialog box.
NOTE: If the Attendant Console does not start immediately, click Options and
check the settings under the Connection Tab. For further information, see page 114
or the Troubleshooting chapter.
TO REMOVE A USER FROM THE LIST OF NAMES:
— Select the desired username from the drop-down list box, then click Delete
User.
Logging Off
TO LOG OFF THE CONSOLE:
— Select Log Off from the Console drop-down menu (see page 34 for information
on drop-down menus).