User guide

Using Attendant Console
Page 68 Mitel
®
Attendant Console User Guide – Issue 3.2, September 2009
To change the password:
Select Change Password from the Programmer drop-down menu in the System
Programmer dialog. The following screen appears.
Enter the current password, if any, in the Old Password text box. Then enter the new
password twice: once in the New Password text box and once in the Confirm New
Password text box. These two entries must match exactly. If they do not you will see an
error message and the password will remain unchanged. The password may contain up
to eight digits and include only numbers (0-9).
Station Tab
To enter information:
While programming, you can double-click any item in the list to change that item. You can
also use the following keyboard shortcuts to edit items without using a mouse.
As you move from one cell to the next, the new cell becomes a text box. You can edit the
selected item, or move to another field.
NOTE
You can also use your Administrator station to program a database password
by entering the Program Database feature code (9932). For more details,
refer to the telephone system's Installation and Field Maintenance Manual or
Administrator's Guide.
Key Description
ESC Cancels the current change.
ENTER Applies the current change.
TAB Applies the current change and moves one cell to the right. If
you are in the last column, it moves to the first cell of the next
row.
SHIFT+TAB Applies the current change and moves one cell to the left. If you
are in the first column, it moves to the last cell of the previous
row.
UP ARROW Applies the current change and moves one cell up.
DOWN ARROW Applies the current change and moves one cell down.
HOME Applies the current change and moves to the top cell in a
column.
END Applies the current change and moves to the bottom cell in a
column.
SPACE Toggles the administrator status of a station when the focus is in
the Administrator column.