User guide

Getting Started
Page 18 Mitel
®
Attendant Console User Guide – Issue 3.2, September 2009
To add (or edit) an OAI Server:
1. Click Add (or Edit). The Edit/Add OAI Connection dialog appears.
2. Enter the desired IP Address, TCP Port, OAI Password, and Description.
• IP Address: Enter the IP address of your OAI Server.
• TCP Port: Enter the port number of the OAI Server.
• OAI Password: Enter the password required by the OAI Server, if applicable. The
password may contain up to 15 characters that are case sensitive and include any
characters (i.e., numerical, alphabetical, and symbols). Asterisks appear in place of
the characters as the password is typed.
• Description: Enter the description of the IP address.
3. Click OK to accept the change, or Cancel to exit without making any changes.
To remove an OAI Server:
1. Highlight the OAI Server you would like to remove.
2. Click Remove.
NOTE
Axel Office Server does not require an OAI password. If there is any
password listed in the OAI Password text box, the Console will ignore it.