User guide

Getting Started
Page 16 Mitel
®
Attendant Console User Guide – Issue 3.2, September 2009
Connection Tab
The Connection tab is used to set up communication with the telephone system. This
information must be entered correctly for the Attendant Console to work. If you do not know the
information, contact your Telephone Administrator.
• Your Station:
o Extension: Enter your extension number.
o Node: Enter the node to which your phone is connected.
o Station Password: Enter the station password programmed for your station. (At
default, this is your extension number.)
• Reconnect: Reconnects your Attendant Console to the system.
NOTE
If you do not know which node your phone is connected, unplug and
replace your phone’s line cord. The phone shows “CKT WW:XX.YY.ZZ” on
the second line of the LCD display. The number to the left of the colon
(WW) is the node number of your phone.
NOTE
You can also use your keyset to program a station password by entering
the Program Station Password feature code (392). For more details, refer to
the telephone system's Installation and Field Maintenance Manual.