User guide

Getting Started
Page 8 Mitel
®
Attendant Console User Guide – Issue 3.2, September 2009
Logging On
You must log on to the Attendant Console before use. If you do not have previously saved
settings you can create a new user or log on as Default. The default user has the default
features and settings.
If you are a new user:
1. Click Add User. This allows you to set and save your own custom features and settings
for use during another session. The following dialog appears.
2. Type your name in the Enter username field and select a username that you would like
to inherit the user settings from, then click OK. For information on setting the Attendant
Console properties, see “Setting Attendant Console Properties” on page 10.
To use previously set features:
1. Select the desired name from the drop-down list of previously entered names.
2. Click Log On. The system displays the message, “Retrieving System Information.”
If this is the first time you have used the Attendant Console, the system will perform a refresh.
To log on as a different user:
1. Select a different user from the list.
2. Click Log On or Add User from the Attendant Console dialog box.
To remove a user from the list of names:
Select the desired username from the drop-down list box, then click Delete User.
Logging Off
To log off the Console:
Select Log Off from the Console drop-down menu (see page 25 for information on drop-
down menus).
NOTE
If a second user logs on, the program automatically logs off the previous user.
NOTE
If the Attendant Console does not start immediately, click Options and check
the settings under the Connection Tab. For further information, see page 80
or the Troubleshooting chapter.