User guide

Page 270

System Features

Inter-Tel

Axxess

Administrator Guide — Issue 11.0, May 2008

Station Password

To change the station password from your station:

1. Enter the Program Station Password feature code (392). You hear a confirmation tone.

If you have a display, it shows ENTER PASSWORD.

2. Enter your current password, followed by #. (At default, it is your extension number.) If

you have a display, it shows NEW PASSWORD.

NOTE: If you enter an incorrect password, the display will show INVALID PASS-

WORD, and your station will return to the idle state.

Enter the new password followed by . You hear a confirmation tone.

4. Enter the new password again for verification followed by . You hear a confirmation

tone. If you have a display, it shows PASSWORD SAVED. Your station returns to idle.

To change the station password using remote programming:

1. If calling from an outside endpoint, access the system through a DISA line. Enter the

DISA security code (if applicable). You hear a confirmation tone.

If programming from another station, lift the handset or press the Speaker button.

2. Enter the Remote Programming feature code (359). You hear a confirmation tone. If

you have a display, it shows ENTER EXTENSION. Executive Display, Professional

Display, and Model 8560 endpoint users can press the IC DIR button to use the inter-

com directory to look up a number.

3. Enter the extension to be programmed. You hear a confirmation tone. If you have a dis-

play, it shows ENTER PASSWORD. If you entered an invalid extension number, you

will hear reorder tones and can try again.

4. Enter the extension’s password followed by . You hear a confirmation tone.

If you enter an incorrect password, the display will show INVALID PASSWORD. Out-

side callers will be returned to dial tone, and stations will return to the idle state.

5. Enter the Program Station Password feature code (392). You hear a confirmation tone.

If you have a display, it shows NEW PASSWORD.

6. Enter the new password, followed by . You hear a confirmation tone.

7. Enter the new password again for verification, followed by #. You hear a confirmation

tone. If you have a display, it shows PASSWORD SAVED. Outside callers will hear

dial tone, and stations return to the idle state.