User guide

Page 261
Redialing
System Features
Inter-Tel
®
Axxess
®
Administrator Guide — Issue 11.0, May 2008
Non-display system speed-dial numbers cannot be redialed at a display endpoint.
Table 30.
Redial Options
STATION STATUS WHEN
REDIAL FEATURE IS
USED
STATION HAS
“LAST NUMBER SAVED”
STATION HAS
“LAST NUMBER DIALED”
Idle station Saves the last trunk access code and
telephone number that was dialed.
A trunk is selected using the same
trunk access code as used to place last
outside call, and the last telephone
number is dialed.
Intercom dial tone (on- or
off-hook)
Saves the last trunk access code and
telephone number that was dialed.
A trunk is selected using the same
trunk access code as used to place last
outside call, and the last telephone
number is dialed.
On an intercom call Releases the current call, seizes a
trunk using the saved trunk access
code, and dials the saved telephone
number.
Releases the current call, seizes a
trunk using the access code used on
the last outside call, and dials the last
telephone number dialed.
After selecting a trunk but
before dialing
Redials the saved telephone number on
the currently selected trunk. (Note that
the current trunk is used instead of the
saved trunk access.)
Redials the last telephone number
dialed, using the currently selected
trunk.
After selecting a trunk and
dialing one or more digits
Releases the current call, seizes a
trunk using the saved trunk access
code, and dials the saved telephone
number.
Releases the current call, reseizes the
trunk (using the access code used on
that call), and redials the digits that
were dialed.
On an incoming outside call Releases the current call, seizes a
trunk using the saved trunk access
code, and dials the saved telephone
number.
Releases the current trunk, seizes a
trunk using the same trunk access code
used on the last outgoing call and dials
the last number dialed.