User guide

Page 250

System Features

Inter-Tel

Axxess

Administrator Guide — Issue 11.0, May 2008

Dialing Station Speed Dial Numbers

To dial a station speed-dial number at a single-line set:

1. Lift the handset. (Inter-Tel endpoints can remain on-hook.)

2. If placing an outside call, select an outgoing trunk or use ARS. If placing an intercom

call or if the outside number contains a trunk access code, skip this step.

3. Hookflash/Recall and enter the Station Speed Dial feature code (382). You hear a con-

firmation tone. Then dial the location code (0-9). The number is dialed.

To dial a station speed-dial number at a non-display endpoint:

1. Lift the handset or remain on-hook.

2. If placing an outside call, select an outgoing trunk or use ARS. If placing an intercom

call or if the outside number contains a trunk access code, skip this step.

3. Inter-Tel endpoint with a speed-dial button: Press the speed-dial button of the

desired number. The number is dialed.

Inter-Tel endpoint without a speed-dial button: Enter the Station Speed Dial feature

code (382). You hear a confirmation tone. Then enter the location code (0-9). The num-

ber is dialed.

To dial a station speed-dial number at a display endpoint:

1. Lift the handset or remain on-hook.

2. If placing an outside call, select an outgoing trunk or use ARS. If placing an intercom

call or if the outside number contains a trunk access code, skip this step.

3. Inter-Tel endpoint with a speed-dial button: Press the speed-dial button of the

desired number. The number is dialed. Display endpoints show the number.

Inter-Tel endpoint without a speed-dial button: Enter the Station Speed Dial feature

code (382). Then do one of the following to dial the number:

• Use a location code: Dial the desired speed-dial location code (0-9).

• Scroll through the displayed numbers: Scroll to the desired number by pressing

the Volume, NEXT, or PREVIOUS button.

• Use the Executive Display, Professional Display, or Model 8560 endpoint

menu: Use the menu buttons to select the desired speed-dial location.