User guide

ManualsBrandsMitel Manualsphones8620

241

242

243

244

245

246

247

248

249

250

Page 225

Exiting and Re-Entering the Conference

System Features

Inter-Tel

Axxess

Administrator Guide — Issue 11.0, May 2008

Exiting and Re-Entering the Conference

To exit the conference and leave the other parties connected (any inside party) with an

Inter-Tel endpoint:

During the conference, press the button and hang up. The button and a Call

button flutters.

NOTE: If all remaining parties are outside parties and the Hold timer expires while you are out

of the conference, the conference recalls your station. The recall rings at your station and the

button flashes at the medium rate. The display shows CONFERENCE RECALLING.

Press the button to return to the conference. If the recall is not answered before the

Recall timer expires, it will recall the Attendant.

To return to the conference:

Lift the handset and/or press the button again.

To exit the conference and leave the other parties connected (any inside party) with a Sin-

gle-Line Set:

During the conference, hookflash/recall and hang up.

NOTE: If the Hold timer expires while you are out of the conference, the parties recall your

station. When the recall rings at your station, lift the handset to answer the recall. If the recall is

not answered before the Recall timer expires, it will recall the Attendant.

To return to the conference:

Lift the handset and/or enter the Conference feature code (5).

Ending the Conference and Placing All Parties on Hold

To end the conference and put all parties on hold (any inside party) with an Inter-Tel

endpoint:

During the conference, press the button and hang up. The button and a Call

button flutters. The parties are still connected in a conference.

To place the parties on individual hold: Press the Hold button or enter the Individual Hold

feature code (336). You can then return to each party individually by pressing the associated

Call or button.

To end the conference and put all parties on hold (any inside party) with a Single-Line

Set:

During the conference, hookflash/recall and hang up. The parties are still connected in a con-

ference.

To place the parties on individual hold: Lift the handset and enter the Individual Hold fea-

ture code (336). You can then return to each party individually by entering the Individual Hold

feature code again.

CNF