User guide

Page 209
Optional Account Codes
System Features
Inter-Tel
®
Axxess
®
Administrator Guide — Issue 11.0, May 2008
Optional Account Codes
Optional account codes can be entered at any time during a call. These user-defined codes are
not pre-programmed, but must be within the maximum length set in programming. If entered,
optional account codes are printed in the SMDR report for that call in place of standard or
forced account codes that may have been used.
To enter an optional account code after selecting a trunk or while on an outside call:
1. Inter-Tel Endpoints: Press the Special button and enter the Optional Account Code
feature code (390). Display endpoints show ENTER ACCT CODE. The outside party,
if any, does not hear you enter the code.
Single-Line Sets: Hookflash and enter the Optional Account Code feature code (390).
The outside party, if any, hears music until step 2 is completed.
2. Enter the account code using the dialpad; Inter-Tel endpoint users may press a speed-
dial button to enter an account code number that has been stored in that speed-dial num-
ber location. (Display endpoints show numbers. You hear a single progress tone when
the code is accepted. Single-line users are reconnected when the system accepts the
account code. (If an account code is entered that has fewer than the programmed maxi-
mum number of digits, press to return to the call. Pressing will cancel the
account code entry.)
#