User guide

Page 125
Diagnostics Feature Codes
System Features
Inter-Tel
®
Axxess
®
Administrator Guide — Issue 11.0, May 2008
Diagnostics Feature Codes
The Diagnostics Mode feature code (9900 or 9100 in Europe) must be entered at the adminis-
trator’s station to enable system diagnostic mode before the following feature codes can be
used:
Set Time/Date 9800 Programs system time and date.
Synchronize Network
Time
9811 Synchronizes the minutes past the hour across the network.
NOTE: If a node's time is off by more than 30 minutes, synchro-
nizing the minutes may cause the hour to change. Also, network
time is automatically synchronized every day at 12:30 AM (00:30),
using the time setting on the node with the lowest number.
Table 18. Administrator Feature Codes (Continued)
FEATURE NAME (CON-
TINUED)
CODE (U.S./
EUROPE)
DEFINITION (CONTINUED)
Table 19. Diagnostics Feature Codes
FEATURE NAME
CODE (U.S./
EUROPE)
DEFINITION
Compression On/Off 9982/9182 Compresses call processing messages sent to Database Program-
ming, speeding up transfers. You should not disable this feature
unless instructed to do so by Inter-Tel personnel.
Compression Statistics 9981/9181 Dumps various statistics related to the Database Programming
compression algorithm. This feature should be used only when
directed to do so by Inter-Tel personnel.
Diagnostic - ASAI Snoop
Off
9926/9126 This feature code turns off the ASAI output to Message Print. ASAI
is the protocol the system uses to talk to Database Programming
and the AVDAP. Turning this feature on helps the Inter-Tel Engi-
neers debug the messaging between Call Processing and Data-
base Programming or Call Processing and the AVDAP.
Diagnostic - ASAI Snoop
On
9927/9127 This feature code turns on the ASAI output to Message Print. ASAI
is the protocol the system uses to talk to Database Programming
and the voice processing system. Turning this feature on helps the
Inter-Tel Engineers debug the messaging between Call Processing
and Database Programming or Call Processing and the AVDAP.
Diagnostic - Dump
Extension
9933/9133 Allows an Inter-Tel field technician to dump out a device or struc-
ture when debugging a problem. The system dumps the internal
data structures for that extension to message print. If you press the
pound button (#) you are prompted for a command. The command
allows you to enter an alphanumeric string of the structure to
dump.