User guide

Page 124
System Features
Inter-Tel
®
Axxess
®
Administrator Guide — Issue 11.0, May 2008
Administrator Feature Codes
Administrator Feature Codes
The following feature codes may be used only at designated administrator stations. Non-
administrator station users hear reorder tones if they attempt to use these feature codes.
Table 18.
Administrator Feature Codes
FEATURE NAME
CODE (U.S./
EUROPE)
DEFINITION
Clear Network Alarm 9851 Clears network-wide alarms on every node in the network, but will
not affect system alarms. The Clear Network Alarm feature code
may be entered on any node in the network, but the Send Network
Alarms flag must be set for the administrator to clear alarms on
other nodes in the network.
Clear System Alarm 9850 Clears all local and network-wide system alarm displays on your
node.
Diagnostics On/Off 9900/9100 Enables or disables system diagnostics mode to perform diagnos-
tics functions such as freezing/unfreezing the database, printing
message logs, and seizing a device for troubleshooting purposes.
NOTE: Because diagnostics mode affects system performance, it
is recommended that you run the diagnostics program when the
system is idle.
Enable Network Day 9862 Places any or all remote nodes into day mode (you are prompted
for the node number).
Enable Network Night 9861 Places any or all remote nodes into night mode (you are prompted
for the node number).
Modem Disable 9867 Disables a local or off-node modem in the system using the
modem’s assigned extension.
Modem Enable 9866 Enables a local or off-node modem in the system using the
modem’s assigned extension.
Modem Reset 9869 Resets a local or off-node modem if the modem is unable to
answer an incoming call or sync-up with the external modem.
Night Ring On/Off 9860 Places system in night mode or cancels night mode. While in night
mode, the night toll and trunk restriction lists are used and the
night transfer relays on the OPC are activated.
Periodic Diagnostics
On/Off
9825 Periodic diagnostics extends and improves the functionality and
checks and reconciliations performed on various resources in the
system.
Program System
Speed Dial
9801 Programs system-wide speed-dial numbers when followed by loca-
tion codes (000-999).
Set Network Date/Time 9810 Programs the time and date for all nodes in the system. (Local
time and date can also be reset by individual nodes.)