User guide

Page 85
System Hardware
Inter-Tel
®
Axxess
®
Administrator Guide — Issue 11.0, May 2008
Keymaps
• Trunk Group Button: These buttons are associated with specific trunk group access
codes and are used for placing outgoing calls on trunks in the selected trunk group. If
assigned to a button with a lamp, the lamp will be lit if all trunks in the trunk group are
in use.
• Undefined Button: Any button can be left undefined if it will not be needed. It can be
programmed, like a user-programmable button, as described above. If the endpoint user
or programmer returns the endpoint to default values, the button will return to being
“undefined.”
• Up Button: (This button type is not required for digital endpoints. It is intended for
analog endpoint use.) No further programming is necessary. This button can be used for
scrolling forward through displays. When the endpoint is idle, it can be used for adjust-
ing volume, in place of the volume button. (digital endpoints use the volume button.)
NOTE: The volume adjustment button on the digital endpoints also can be used for
scrolling through displays. However, the analog endpoint volume buttons are used only
for adjusting volume; analog endpoints need to have Previous and Next buttons pro-
grammed in their keymaps to scroll through displays. They also need an Accept button
to accept entries when in numeric programming mode.