Specifications

Chapter 4: Specifications
Processing Server (PS-1)
Page 4-32 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
Processing Server (PS-1)
This section describes specifications relevant to the PS-1.
Processing Server Characteristics
Table 4-4 summarizes the physical, electrical, and server computing characteristics of the PS-1.
For a summary of suitable environmental characteristics see “Environmental Requirements” on
page 4-4.
PS-1 Licensing
Adding the PS-1 to the Mitel 5000 platform requires the following licensing, at a minimum:
• Mitel 5000 v2.0 software, part number 840.0622
• Mitel CS-5600 License Base, part number 840.0624
Additional licensing is required if upgrading a system from an earlier hardware version, if using
IP Networking, and/or adding certain endpoints. For details of required licensing, see “Licensing
and Mitel CS-5600 Upgrades” on page 3-16.
Table 4-4. PS-1 Specifications
Characteristic Description
Physical dimensions
Length 14.50 in. (36.83 cm)
Width 17.00 in. (43.18 cm)
Height 01.75 in. (04.45 cm)—1 U
Weight 9 lb (4.08 kg), approximately
Electrical
Power requirements 105–125 VAC, 57–63 Hz (USA);
240 VAC, 50 Hz [Europe]
Server computer
Processor Intel
®
Pentium 4, 2.8 GHz
Operating System Linux
®
Debian v2.6
Hard drive capacity 80 GB
RAM 1 GB
System interfaces
LAN 100 Mbps Ethernet
online Monitor (OLM) RS-232, DB-9 serial port with null modem cable
Security Key USB 2.0
IMPORTANT
When installing v2.x software, the license must match the system CPU
type. A Mitel CS-5200 system requires a CS-5200 license; a Mitel CS-
5400 system requires a CS-5400 license; and, a Mitel CS-5600 system
requires a CS-5600 license.