Specifications

Appendix A: Private Networking
T1/PRI and E1/PRI Programming
Page A-8 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
2. Check that the port on the T1M or T1M-2 module has been installed and configured for
either T1/PRI or E1/PRI. Also, if using PRI, make sure you have a sufficient PRI license,
part number 840.0227.
3. Set the reference clock for both nodes. In the Communication Server folder, double-click
Reference Clock List.
• One one of the nodes, set the value to Masters for Private Network.
• On the other node, set the value to Slaves to Public Network.
One node must
be set to Slaves to
Public Network and
the other node
must be set to
Masters for Private
Network. There can
only be one node
set to Masters for
Private Network.