Specifications

Chapter 6: Programming
SLM-8 Programming Procedures
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-149
To program single line endpoints:
1. Start the Inter-Tel 5000 Session Manager. The DB Studio window appears.
2. From the left pane of the DB Studio window, select System – Devices and Feature
Codes – Endpoints – <local extension number>.
3. Program the single line endpoint in accordance with user requirements. For content
guidance and data definition and control, refer to Inter-Tel CS-5200/5400/5600 Program
Planning Sheets (.DOC), part no. 835.2882.
To uninstall an SLM-8 module:
1. Start the Inter-Tel 5000 Session Manager. The DB Studio window appears.
2. From the left pane of the DB Studio window, select System – Communication Server –
Digital Expansion Interface <DEI n> – Single Line Module - 8. See Figure 6-25 ‘‘SLM-8
Single Line Ports and Circuits’’ on page 6-147.
3. Click the Bay icon to the left of the module name. The drop-down arrow appears.
4. Click the drop-down arrow and select Uninstalled.