Specifications

Chapter 6: Programming
SLM-8 Programming Procedures
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-147
Figure 6-24. SLM-8 Option in a DEI Bay Drop-Down Box
To set up one SLM-8 single line port and circuit number:
1. Make sure an SLM-8 module is installed in a system DEI.
2. Start the Inter-Tel 5000 Session Manager. The DB Studio window appears.
3. From the left pane of the DB Studio window, select System – Communication Server –
Digital Expansion Interface <DEI #: Single Line Module - 8>. When you click the
desired Bay n: Single Line Module - 8, the status of the SLM-8 ports appears in the right
pane. See Figure 6-25 ‘‘SLM-8 Single Line Ports and Circuits’’ on page 6-147.
4. Click the Port icon to the left of the port number you want to use. A drop-down box and
arrow appear.
5. Click the drop-down arrow and select Single Line.
6. Click anywhere in the right pane. The Create Single Line Extension window appears.
7. Click the drop-down arrow of the Starting Extension box. A drop-down list of system
circuit numbers unfolds.
8. Scroll to the unused circuit number you want to assign, select it, and click OK. The
selected system circuit number, or telephone extension, appears in the Circuit 1 column
next to the Port you chose. See Figure 6-25.
Figure 6-25. SLM-8 Single Line Ports and Circuits