Specifications

Chapter 6: Programming
Internet Protocol Resources
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-141
• IP Terminal TCP Call Control Port: The IP Terminal TCP Call Control Port defines
the port number the IP resource uses for call control. To change the port number,
enter the new number in the text box, then press ENTER or click another field. The
range is 1024–65535, and the default is 5566.
• IP Terminal General Purpose UDP Port: The IP Terminal General Purpose UDP
Port defines the port number the IP resource application uses for general purpose
and broadcast messages. To change the port number, enter the new number in the
text box, then press ENTER or click another field. The range is 1024–65535, and
the default is 5567.
• MGCP Receive Port: The MGCP Receive Port defines the port number the MGCP
gateway and endpoints use for communication. To change the port number, enter
the new number in the text box, then press ENTER or click another field. The range
is 1024–65535, and the default is 2427.
• TCP Call Control Port: The TCP Call Control Port defines the port number that
off-node IP resources use to connect call control with this IP resource. The TCP
Call Control Port cannot conflict with other port numbers on the IP connection.
Changing the TCP Call Control Port resets the IP resources. The system
broadcasts changes to an IP connection TCP Call Control Port to the other nodes
in the private network as a database update. The IP connection TCP Call Control
Port must be kept in sync throughout the network. This field corresponds to the off-
node IP connection Remote Listening Port. To change the port number, enter the
new number in the text box, then press ENTER or click another field. The default is
5570, and the range of values is 1025–65535.
• Echo Profile: Refer to the Mitel 5000 Features and Programming Guide, part
number 580.8006.
4. Allocate IP Resources using the Resource Reservations Tool under the Tools menu.
Refer to the Mitel 5000 Features and Programming Guide, part number 580.8006.
5. Configure the Processor Module IP settings, as described on “Processor Module” on
page 6-137.
6. Configure the IP Connection settings. Refer to the Mitel 5000 Features and
Programming Guide, part number 580.8006.
7. Create a universal numbering plan that includes IP connections for forward compatibility.
One such plan is to use the convention of “PSnnc” where P is the pause digit, S is the
number 6 or 7, nn is the node number, and c is a number between 0–9 identifying the
specific IP resource to which the IP connection corresponds.