Specifications

Chapter 6: Programming
Programming the Busy Out Manager
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-135
Programming the Busy Out Manager
A context menu item appears for Dual T1/E1/PRI, T1/E1/PRI, and Basic Rate modules that
allows you to open the Busy Out Manager. You must be in the Communication Server view in
Remote Mode to access the Busy Out Manager.
Figure 6-16. Busy Out Manager
The Busy Out Manager allows you to select ports or circuits from a list and specify Busy Out
commands for the selected items. The Busy Out Manager displays all ports on the selected
module as well as what type of port is configured (a “None” device will be shown if the port has
not been configured). Selecting a port displays the devices/circuits programmed for that
particular port (devices/circuits that have not been configured will not show up as a None
device).
Figure 6-17. Busy Out Manager Programming