Specifications

Chapter 6: Programming
Configuring a Single-Port/Dual-Port T1/E1/PRI Module (T1M/T1M-2)
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-123
T1/E1 Circuits
To select the port type for a specific circuit:
1. Select the current Circuit Type description and use the drop-down list box to scroll to the
new port type.
2. Press ENTER or click another field to save the change.
To equip several circuits at once:
1. Select the circuits you want to equip. To select a series of items, hold down the SHIFT
key while selecting the first and last item in the range. To select two or more that are not
consecutive, hold down CTRL while selecting the desired items.
2. Right-click and select Batch Change Type. One of the dialogs below appears.
3. Select the circuit type you want to assign, and then click OK.
If the new devices require extension numbers, you will be prompted to select the first number in
the batch. The available extension numbers will be assigned sequentially to the newly equipped
circuits. If you attempt to exceed the device limit of the System, an error message appears
informing you the operation cannot be performed.
T1 Options:
T1/PRI or E1/PRI Options: