Specifications

Chapter 6: Programming
Configuring a Single-Port/Dual-Port T1/E1/PRI Module (T1M/T1M-2)
Page 6-122 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
To program a port on one of the T1M or T1M-2 modules, double-click the module to display the
programming fields. Module Programming includes the following fields.
Table 6-19. T1M and T1M-2 Module Programming Fields
Field T1 T1/PRI E1/PRI Ref.
T1/E1 Circuits

6-123
T1/E1 Diagnostics

6-124
Timers

6-125
Call Type

(T1M-2 only)
6-126
Overlap Sending

6-127
Description

6-128
Enable On-Module Dialing


(T1M-2 only)
6-129
Framing Type

6-129
Zero Code Suppression

6-129
Line Impedance

6-129
CRC Processing

6-130
Haul Mode

6-130
Line Build-Out

6-130
Loop Length

6-131
ISDN Switch Type

6-131
CO Provides Progress Tones

6-132
Connect on Call Proceeding

6-132
Operator System Access

6-133
Retry ARS Call If Call Rejected

6-133
Send International Toll Digits

6-133
D-Channel Diagnostics

6-134
Span Companding Type

(T1M-2 only)

(T1M-2 only)
6-134