Specifications

Chapter 6: Programming
Configuring a 2-Port/4-Port Loop Start Module (LSM-2/LSM-4)
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-119
Configuring a 2-Port/4-Port Loop Start Module (LSM-2/LSM-4)
The system provides two or four loop start ports. The ports provided in these modules are in
addition to the built-in ports of the same type. The primary difference is that the built-in ports
also provide the Power-Fail Bypass functionality.
To equip a single port:
1. Select the current Port description and use the drop-down list box to scroll to the new
port type.
2. Press ENTER or click another field to save the change.
To equip several ports at once:
1. Select the ports you want to equip.
To select a series of items, hold down SHIFT while selecting the first and last item in the
range. To select two or more that are not consecutive, hold down CTRL while selecting
the desired items.
2. Right-click and select Batch Change Type. The following dialog boxes appear.
3. Click the port type you want to assign, and then click OK.