Specifications

Chapter 6: Programming
Selecting a Voice Processor Type in Local Mode
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-111
4. Select the option button for the voice processor type you know is connected to the
system.
5. Click OK to continue programming the selected voice processor. If you select Cancel,
the Voice Processor Enable field in the System folder toggles to No. If you select a voice
processor type, or if one already exists in the database, you must restart the system in
order for the changes to take effect. The following message window appears.
6. Click OK. The voice processor type is updated in DB Programming and the session
closes. Clicking Cancel toggles the Voice Processor Enable value in the System folder
to No, cancels any Select a Voice Processor Type selection made, and displays the DB
Studio window.
7. Restart a local DB Programming session.
8. Once enabled, the voice processor can be configured and programmed in accordance
with customer requirements. The following illustration shows a sample of the Voice
Processor folder contents.