Specifications

Chapter 6: Programming
Introduction
Page 6-106 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
SYSTEM DIRECTORY FOLDERS AND TASKS
This section provides information about the DB Programming functions located in the System
directory.
Figure 6-12. System Directory Folders
Introduction
After using Session Manager to start a Database (DB) Programming session, the DB Studio
window appears, consisting of two panes. In the narrow pane on the left, the system IP address
appears along with four top-level directories: Passwords, Software License, System, and Voice
Processor. The larger pane on the right shows also the four top-level directories as well as
settings for the following system-wide parameters: Date, Enable Daylight Saving Time, Enable
Network Time Protocol (NTP), Primary Language, Secondary Language, Time, and Time Zone.
For DB Programming purposes, the right pane is also used for displaying the contents of any
directory selected in the left pane.
For example, when you click the System folder located in the left pane, the following
programming areas display in the right pane. For the items below without links, refer to the Mitel
5000 Features and Programming Guide, part number 580.8006, for information.
• “Communication Server Directory Programming” on page 6-112
• “Devices and Feature Codes
• “Echo Profiles”
• “Endpoint-Related Information”
• “Flags”
• ‘Hunt Group-Related Information”
• “IP-Related Information”
• ‘IP Settings”
NOTE
Programmers must have received Mitel 5000 Basic certification and CTP certification
to receive Mitel technical support at no cost.