Specifications

Chapter 6: Programming
Troubleshooting Tips
Page 6-104 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
15. Troubleshooting Tip 8 of 8: Follow the instructions on the displayed page and verify
that the Base Server is using the correct port number and that the port is open.
For information about checking the port number using the DMU, click Details. The
following dialog box appears. Click OK.
16. Click Update Connection Status to check the connection status.
At any point in the wizard, you can click Finish. DB Programming shuts down so that, if the
connection was established, the appropriate folder structure is preserved. When you reconnect,
if the connection was repaired, you will not be prompted for the wizard.