Specifications

Chapter 6: Programming
Troubleshooting Tips
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-103
13. Troubleshooting Tip 7 of 8: Follow the instructions on this page and verify that the PS-
1 is using the correct port and IP address to connect with the Base Server. Change the
settings as needed.
For information about accessing the cp_system_log files, click Details. The following
dialog box appears. Click OK.
14. Click Update Connection Status to check the connection status. If the status continues
to show Disconnected, click Next.