Specifications

Chapter 6: Programming
Finishing the Wizard Configuration
Page 6-96 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
Finishing the Wizard Configuration
The Finish dialog box allows you to see the configuration settings. Use the Back button to
navigate back through the wizard to make any changes.
1. Expand the tree and check the configuration changes or additions. If satisfied with the
configuration, click Finish.
2. Click OK to the prompt that appears.
IMPORTANT
If IP settings were entered or changed, reset the system. Refer to the
Mitel 5000 Features and Programming Guide, part number 580.8006.