Specifications

Chapter 6: Programming
Programming Expansion Modules
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-89
Single Line Module Programming
To add an SLM-4 to a Base Server bay:
1. Select Single Line Module - 4 from the Expansion Modules list, then click Add >> to
move it to the Expansion Bays list.
2. Click the Move Up and Move Down buttons as appropriate to identify the bay that
contains the SLM-4 module.
3. Click Next. When the Single Line Module - 4: Circuit Configuration window appears, you
can configure a single SLM-4 port and circuit or a batch of ports and circuits.
To configure a single SLM-4 port and
circuit:
1. From the Single Line Module - 4:
Circuit Configuration page, select
the Port you want to configure
from the list appearing in the
Single Line Module - 4 Circuits
pane. The port field changes
color.
2. Click Change. The Batch
Change Type window appears.
3. Select the Single Line option and
click OK. The Create Single Line
Extension window appears.
4. From the Starting Extension list,
select an available extension
number, then click OK. The
selected extension number
appears in the Circuit 1 column to
the right of the port being
configured.
5. At any time going forward,
program the endpoint in
accordance with customer
requirements from the
System\Devices and Feature
Codes\Endpoints folder. For
guidance, see paragraph on
page 6-144.