Specifications

Chapter 6: Programming
Programming Expansion Modules
Page 6-88 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
LSM-2/LSM-4 Module Programming
The dialog box at right
shows the LSM-4 module
you can add to the system.
When the page initially
displays, the Expansion
Bays panel is populated
with any expansion bays
already installed. If the
main chassis contains no
expansion modules, this
window is empty.
To configure the LSM-4
module:
1. Select the LSM-4
module, then click
Add >>.
2. Click Next. The
Circuit Configuration
dialog box appears.
3. Select the circuits
you want to
configure, then click
Change.
4. Select Loop Start
from the Batch
Change dialog box,
then click OK. Click
None to unequip
any configured
circuits.
5. Accept the default
starting extension or
select a new starting
extension from the drop-down list. Click OK.
6. Click Next to advance to the next wizard dialog
box (discussed on page 6-91). See DB
Programming online Help for information on
manually adding and configuring the LSM-4
module.