Specifications

Chapter 6: Programming
Programming Expansion Modules
Page 6-82 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
To configure BRM-S ports and circuits:
1. Click the port/circuit
you want to
configure, then click
Change. To select all
circuits, click once to
highlight the first
circuit, then shift-click
the second circuit to
select the range.
2. From the Batch
Change Type dialog
box, indicate the
circuit type, then click
OK. The Choices
are:
• None (default)
• Trunk/Trunk
3. Select the starting
extension for each
circuit and the
number of
extensions. If you
selected both circuits
in step 1, the Get B-
Channel Extension
dialog box appears
twice, as shown in
the example at right.
The dialog box at
right appears after
you click OK in the
Get B-Channel
Extension dialog box.
4. Click Next to get
through the wizard
and to the finish
dialog box. See
page 6-88 for the
LSM-4 module setup.
For information about
manually adding and
configuring the BRM-
S module, refer to
the DB Programming
online Help.