Specifications

Chapter 6: Programming
Programming IP Devices
Page 6-78 Mitel
®
5000 Installation Manual – Issue 3.0, October 2008
To add a SIP trunk:
1. Select SIP Trunk from the Batch Change Type dialog box. The Get SIP Trunk Extension
dialog box below appears.
2. Accept the default Starting Extension or select another extension from the drop-down
list.
3. Enter the Number of Extensions using the arrows or by selecting and entering a value.
Clicking the down arrow decreases extensions. Clicking the up arrow adds extensions.
4. Do one of the following:
• Add additional SIP trunks or edit IP endpoints (next).
• Or, click OK.
5. When finished with setting up IP devices, click Next on the IP Device Setup page. The
Expansion Module Installation page appears. See page 6-80, or continue to “Editing
Existing IP Devices” next.