Specifications

Chapter 6: Programming
Programming IP Devices
Mitel
®
5000 Installation Manual – Issue 3.0, October 2008 Page 6-77
To add an MGCP endpoint:
1. Select MGCP Endpoint, then click OK to open the Batch Create MGCP Endpoint dialog
box.
2. Use the default starting extension shown or select a different Starting Extension from
the drop-down list.
3. Type the Number of Extensions using the stepper arrows or by selecting and entering
a value. Clicking the down stepper arrow removes extensions from the list. Clicking the
up stepper arrow adds extensions to the list.
4. Select the associated MGCP gateway for these endpoints, or select another MGCP
gateway from the list.
5. Click any device with a red “X” and then type a name. Click OK.
6. Do either of the following:
• Add additional MGCP endpoints or other IP devices.
• Or, click OK.
7. When finished with setting up IP devices, click Next on the IP Device Setup page. The
Expansion Module Installation page appears. See page 6-80, or continue to the pages
that follow to program other devices.